Brick Machine With Rack Maintenance System

Brick machine with rack maintenance system is a complete set of equipment for concrete block production. The system is mainly composed of key components such as the lifting trigger body, brick frame, hanger machine body, and transport vehicle body. Each component has its specific function and role. The system can improve production efficiency and ensure that the blocks remain neat and stable during the curing process. The application scenarios and product advantages of the brick machine with rack maintenance system are as follows: 1. Improve production efficiency: By placing the blocks into the frame and entering the curing kiln as a whole, the time for manual handling and placement can be reduced, thereby improving production efficiency. 2. Ensure curing quality: The way of entering the curing kiln as a whole can ensure that the blocks remain neat and stable during the curing process, avoiding uneven curing problems caused by improper positioning. 3. Save costs: The automated and integrated operation method reduces labor costs and material losses, thereby reducing overall operating costs.

Brick machine with frame curing kiln

Brick machine with rack curing kiln is a kind of equipment used for concrete block production. Its main function is to place concrete blocks into a frame that is easy to carry and put them into the curing kiln for curing. Brick machine with rack curing kiln usually adopts a tunnel structure, which is long and has a multi-layer brick stacking area inside. It is equipped with heating system, humidity control system and other equipment to adjust the temperature and humidity of the curing environment. This design enables the kiln to control the humidity and other environmental parameters of the bricks, so that they can be cured under appropriate conditions, thereby improving the strength and durability of the bricks.

The daily maintenance of Brick machine with rack curing kiln is as follows:

1. Equipment operation status inspection

Daily maintenance needs to focus on checking the operation of the fan and pipeline, confirming that the fan has no abnormal noise or vibration, and the bolts of each part are tightened without looseness; regularly observe whether the kiln car channel is clean and flat, and whether the kiln car is accurately positioned in place to avoid poor operation due to foreign objects on the track. At the same time, it is necessary to monitor the oil level and sealing condition of the support wheel bearing group to prevent oil leakage or uneven oil film from causing equipment wear.

2. Lubrication and sealing management

All lubrication points must strictly implement the lubrication system to ensure that the bearings of the support rollers, transmission gears and other parts have sufficient oil and the oil viscosity is appropriate; regularly check the effectiveness of the sealing device, including the wear of the sealing components, the state of the friction contact surface and whether there is air leakage, and replace damaged parts if necessary to ensure the sealing effect.

3. Temperature, humidity and environmental control

The curing kiln needs to maintain a stable temperature and humidity environment to optimize the hydration process of the product. Check the operating status of the cooling water system every hour to ensure that the water flow is smooth and the water level of the water tank under the support roller is appropriate; equipment vibration or external force impact is prohibited during the curing period. The natural curing temperature should be controlled at 20-25℃, and the curing cycle should be at least 3-7 days to ensure that the refractory cement is fully hardened.